User's Manual

TV MENU BUTTON - OPERATIONS

(5) FM BROADCAST MODE & FM FREQUENCY

The

LVMD-102/LVMD-102S

has a built-in FM Stereo Broadcast Transmitter to allow you to listen to the

audio signal from the selected program source (TV, DVD, VIDEO1, VIDEO2) through the vehicle's FM radio.

Procedure

1. Press the TV MENU button as many times as necessary to select "FM MODE".

2. Press the VOLUME+ button as many times as necessary to set FM MODE as desired to "MODE1",

"MODE2" or "OFF".

3A. If "MODE1" was selected in Step 2 above, press the TV MENU

button again to select "FM FREQ.", then press the VOLUME +

button repeatedly to choose one of the 4 preset FM

Frequencies: 88.3MHz, 88.7MHz, 89.1MHz or 90.3MHz.

-OR-

3B. If "MODE2" was set in Step 2 above, press the TV MENU but-

ton again to select "FM FREQ.", then press the VOLUME + but-

ton to choose any FM Frequency from 88.3MHz to 90.3MHz in

0.1MHz (100KHz) increments.

4. Tune the vehicle's radio to the frequency chosen in Step 3 above.

It may be necessary to repeat Step 3, choosing a different frequency each time, before you are able

to receive a satisfactory signal. The best signal is usually obtained by choosing a frequency that is

not actively broadcasting in your area. Also note that better results may be obtained if the vehicle's

antenna can be lowered independently.

Example - Receiving Audio through the FM Radio at 88.7MHz.

(4) ZOOM

: This function lets you select between wide and normal screens.

Normal 4 : 3

Wide 16 : 9