User's Manual 32"/42" TFT LCD T V Part No
Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Important Safety Instructions Shock Hazard Marking and Associated Graphical Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Explanation of Safety Related Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER,SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL Before connecting the AC power cord to the DC adapter outlet make sure the voltage designation of the DC adapter corresponds to the local electrical supply Never insert anything metallic into the cabinet openings of the Liquid Crystal Display Television LCD: doing so may c
General safety precautions Thank you for purchasing our product. Before using it, please read this user's manual carefully and apply it correctly and safely. Please keep this manual close to you so you can refer to it anytime after reading it. Also, for the transportation of the product, please attach this manual without fail. Please observe the notes below. 6 1. Use at the rated power voltage. Use of non-rated voltage may cause fire, electric shock and breakdown. 2.
General safety precautions 17. Do not install at the place with moisture or dust. It may cause the fire or the electric shock 18. Do not install it at the place with poisonous gas. It may cause the fire. 19. Do not install it at the location with continuous vibration. It may be tipped over as it loses balance or damaged as it is fallen down. 20. Do not install it at the place on the strong magnetic field or current field. It may cause fire, electric shock or break down.
Contents I mportant Sfety Instructions . . . . . . . . . . . . . . . . . . . .3 G eneral Safety Precautions . . . . . . . . . . . . . . . . . . . .6 F ront Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 R ear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 A ccessory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 R emote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . .12 C onnecting to watch TV,VCR or DVD . . . . .
Front Panel B A A B 1. TV/VIDEO Display a menu of the available input sources. 2. MENU Display the main on-screen menu. Exit from sub-menu. 3. VOL(-/+) Press the increase or decrease the volume. Also used to increase or reduce the value of a menu option. 4. CH( / ) Press CH or CH to change channels. Also used to highlight selections on the on-screen menus. 5. POWER Sub power switch 6. STAND BY The color of LED is changed into RED. 7. ON The color of LED is changed into GREEN. 8.
Rear Panel 1. RS-232C JACK 2. HDMI 3. DVI AUDIO 4. PC D-SUB 5. PC AUDIO 6. COMPONENT 1 7. COMPONENT 2 8. AUDIO LINE OUT 9. S-VIDEO 10. A/V IN Do not use this jack for customers. Use to connect a video signal from a PC or DVD. DVI to HDMI Used to connect a video signal from a personal computer. Connects to the sound-output port of a personal computer. HDTV Input (Video signals from a HDTV player. HDTV Input (Video signals from a HDTV player.
Accessory Inserting the batteries in the remote controller You must insert or replace the batteries in the remote controller when you: Purchase the set. Find that the remote controller is no longer operating correctly. 1 Remove the cover of the remote controller by pressing the symbol and pulling the cover space in the direction of the arrow.
Remote Control Unit 1. MUTE Button (Press to temporarily cut of the sound) 2. SLEEP Button 3. CCD Button 4. Numeric Buttons (Direct Channel select.) 5. Q-VIEW Button (Quick view for previous channel) 6. EPG Button (User can check about present channel, next program list and information by selecting the EPG key.) 7. VOLUME Up(+) / Down(-) Button Channel Up(+) / Down(-) Button / / Button (This buttons are used to make adjustments to the selected menu item) 8. MENU Button 9.
Connecting to watch TV, VCR or DVD Connecting the Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of following sources: An outdoor aerial An indoor aerial (not recommendable) A cable television network 1. In the first three cases, connect the aerial or network input cable to the 75 ohm coaxial socket on the rear of the TFT LCD TV. 2. Press the TV button on the remote control. Connecting the VCR, DVD or Other external devices 1.
Connecting to watch TV, VCR or DVD Connecting a DVD Player (Connecting to Y, Pb, Pr) 1. Connect a set of audio cables between the component AUDIO IN jacks on the TFT LCD TV and the AUDIO OUT jacks on the DVD Player. 2. Connect video cables between the Y, Pb and Pr inputs on the TFT LCD TV and Y, Pb and Pr outputs on the DVD Player. (Note : For an explanation of Component video, see your DVD Player's Owner's manual.
Setup Selection Scanning Channels (Automatic) This will scan all the available Channels. Channel scan should be done before using this product. You should set the proper TV reception method, 'Air' for outdoor air antenna and 'STD, HRC & IRC' for your cable TV System. For the cable system, please contact your local cable TV provider. 1. Press MENU button on the remote control and navigate by pushing [ ] or [ ] Keys to select 'Channel' menu. 2. Press [ ] or [ ] button to enter [Setup] Menu. 3.
Setup Selection Setup Edit-Store or Delete the Channels 1. Press MENU button and select [Setup] menu by manipulating [ ] or [ ] button and then, press [ ] button to get into. 2. In this menu, select [Setup Edit] by pressing [ ] or [ ] button. 3. Setup Edit menu will be up when you press [ ] button. Channel Edit mode manages Digital and Analog channels separately. (For example, only available DTV channels will be displayed in DTV mode, no analog channels at all).
Setup Selection Using Favorite (FAV.) Channel Function Favorite Channel Function is to ease channel change among your frequent watching or favorite channel by separately memorizing them in FAV. To Register as Favorite Channel 1. Press [ ] or [ ] button or [ ] or [ ] button to select the channel you would like to register in the available channel menu on the right side of display. 2. Press 'FAV' on the selected one to register it as a favorite channel 3.
Setup Selection Displaying EPG(Electronic Program Guide EPG is available only when you watch Digital TV. EPG displays TV Programs with reference to a channel and time interval. 1. Press EPG button on the remote control during watching HD TV Program. 2. Press [ ] or [ ] or [ ] or [ ] button to navigate Programs with reference to each channel. 3. You can check the program schedule with reference to a channel and see program information by pushing 'OK'. *Not every program has EPG information.
Setup Selection Changing the input mode This explains how to change and watch other Input Sources by pushing AV.SEL buttons 1. Press [AV.SEL] button on the Remote control. 2. You can change Input Source to be displayed every time you press the button. It changed among the connected source only. * You can select TV, PC/HDMI Mode directly by pressing [DTV/TV] / [PC/HDMI] button on the remote control accordingly. Concerning how to connect external devices, you can consult "Installation" section.
Picture Configuration Adjusting the Aspect Ratio This explains how to change Aspect Ratio to '4:3, 14:9, Panorama and Wide'. Press [SIZE] button on the remote control. The Aspect Ratio is changed in turn as you press the button. Wide Panorama Zoom 4:3 14:9 To change the Aspect Ratio in OSD Menu 1. Press MENU button on the remote control. 2. Press [ ] or [ ] button to select '[Picture] menu and push ] button. 3. In [Picture] menu, select [Size] with [ ] or [ ] button. 4.
Picture Configuration Changing the Preset Picture Mode Your TV has several factory presets which allow you to control the picture. Press [P.STD] button on the remote control. The picture mode is changed as you press the button. Custom Dynamic Standard Movie Mild To change the Picture mode in OSD Menu 1. Press MENU [ ] button on the remote control. 2. Press [ ] or [ ] button to select [Picture] menu and push Volume [ ] button. 3. In [Picture] menu, select [Picture Mode] with [ ] or [ ] button. 4.
Picture Configuration Adjusting the Color Tone This explains how to change the tone of the screen. 1. Press MENU button on the remote control. 2. Press [ ] or [ ] button to select [Picture] menu and push [ ] or [ ] button. 3. In [Picture] menu, select [Color Tone] with [ ] or [ ] button 4. Change Color Tone Preset with [ ] or [ ] button.
Sound Configuration Changing the Preset Sound Mode This TV set offers five sound modes (Custom, Standard, Music, Movie, Speech). Press [S.STD] button on the remote control. The mode is changed one by one every time you press it. Custom Speech Standard Music Movie To change the Sound mode in OSD Menu 1. Press MENU button on the remote control. 2. Press [ ] or [ ] button to select [Sound] menu and push [ ] button. 3. In [Sound] menu, select [Sound Mode] with [ ] or [ ] button. 4.
Sound Configuration Automatic Volume Level Control Auto Volume normalizes the different sound volume level that can be different in broadcast station. This lets you have adjusted mean value of volume level per channel. 1. Press MENU button on the remote control to select [Sound] menu. 2. Press [ ] button on [Sound] menu. 3. Press [ ] or [ ] button to select [Auto Volume]. 4. Push [ ] or [ ] button until [Auto Volume] is "on".
PIP(Picture In Picture) Selection PIP is the function to display two different input source simultaneously. 1. Press [PIP] on the remote control. [PIP] is changed as following every time you press [PIP] button On Off To set PIP in On Screen Display Menu 1. Press MENU button on the remote control. 2. Select PIP menu by pressing [ ] or [ ] button. 3. Press [ ] button and select [PIP] by pressing [ ] or [ ] button 4.
PIP(Picture In Picture) Selection Adjusting the Size of Sub picture Press [SIZE] button on the remote control. The size is changed in the following order each press. Small DOUBLE DOUBLE2 To adjust the size in On Screen Display Menu 1. Press MENU button on the remote control. 2. Select PIP menu by pressing [ ] or [ ] button. 3. Press [ ] button and select [Size] by pressing [ ] or [ ] button. 4. Press [ ] or [ ] button to adjust the size.
PIP(Picture In Picture) Selection Adjusting the position of Sub picture You can change the position to 'Up', 'Down', 'Left', 'Right'. The position of Sub picture is changed as you press [POSITION] button on the remote control. To adjust the position in On Screen Display Menu 1. Press MENU button on the remote control. 2. Select PIP by pressing [ ] or [ ] button. 3. Press [ ] or [ ] button. 4. Select [Position] by pressing [ ] or [ ] button. 5.
Function Selection Changing the OSD Menu language You can change the OSD Menu Language. 1. Press MENU button on the remote controller 2. Press [ ] or [ ] button to select [Set Up] menu and push [ ] or [ ] button 3. In [Set Up] menu, select [Language] with [ ] or [ ] button. 4. Change Language by pressing [ ] or [ ] button. Setting the Blue Back Screen If no signal is being received or the signal is very weak, a blue back screen is automatically displayed instead of the noisy image. 1.
Function Selection Setting the Current Time (Time Zone) Time Zone setting is required for setting the time and receiving EPG properly. Once system time is set, all the relevant functions such as timer are available. 1. Press MENU button on the remote control. 2. Select Setup menu by pressing [ ] or [ ] button. 3. Press [ ] button, select 'Time' with [ ] or [ ] button and press [ ] button again. 4. In [Time Zone] menu, manipulate [ ] button to select the region you live.
Function Selection Setting the Sleep Timer You can adjust the time for automatic system down. Press [Sleep] button. Sleep Timer is changed as following every time you press [Sleep] button. OFF 30Min 60Min 90Min 120Min 150Min 180Min To set the sleep timer in [Setup] menu. 1. Press MENU button on the remote control. 2. Select Setup menu by pressing [ ] or [ ] button. 3. Press [ ] button, select 'Time' with [ ] or [ ] button and press [ ] button again 4. Select [Sleep Timer] by pressing [ ] or [ ] button. 5.
Function Selection Pixel Shift Due to its fundamental and built-up technology of LCD, when it is turned on long time of period especially with a still image, it can have afterimage that does not disappear even though it is turned off. During watching TV, this can affect serious image quality problem. However, with this feature, each pixel of LCD is shifted to right or left minutely and regularly, surely impossible to be noticed by human eyes, to protect afterimage effect. 1.
Function Selection Viewing Closed Caption Closed Caption feature is to display On Screen Text Messages during watching TV. This feature is available in both analog and digital broadcast. 1. Press MENU button on the remote control, select Setup menu by manipulating [ ] or [ ] button and press [ ] button. 2. Press [ ] or [ ] to select [Caption] and then [ ] button 3. 'Caption' sub menu will appear. Sub Menus of Caption Caption : Turn the feature on or off. This can be set by [ ] or [ ] button.
Function Selection Parental Rating Control (V-Chip) V-chip feature automatically locks TV Programs (TV Parent Guide Lines) or Movie (MPAA) that is considered as inappropriate for children. To activate, deactivate or set the rating, you should enter a PIN (Personal ID Number). 1. Press [MENU] button to display the menu. 2. Press [ ] or [ ] button to select 'Setup', and then press [ ] or [ ]. 3. Press [ ] or [ ] button to select 'V-Chip', and then press [ ] or [ ]. 4. The message "Enter PIN" will be appear.
Function Selection For instances, if you block TV-Y, TV-Y7 will automatically be blocked and similarly, if you block the TVG, all the categories in "young adult" (TV-Y, TV-Y7, TV-G, TV-PG, TV-14, and TV-MA) will be blocked. * Each Restriction Category has additional options, sub-ratings. FV: Fantasy Violence D: Sexually Suggestive Dialog L: Adult Language S: Sexual Situation V: Violence V-Chip will automatically block certain sub-categories that are more restrictive.
Adjusting the PC Picture Settings Connecting a PC 1. Turn off your computer and LCD TV. 2. Connect a PC D-sub cable between your PC and PCVIDEO-IN of the LCD TV. And then fasten the screws of both sides of the cable. 3. Connect a PC Audio cable between the sound output jack of the sound card on a PC and the PC-AUDIO-IN of the LCD TV. 4. Power on the computer before turning on the LCD TV. Initial set PC mode 1. Power on your LCD TV by pressing the POWER button on the main set or on the remote controller.
Adjusting the PC Picture Settings Using as a PC Monitor This LCD TV is designed to be used as a PC Monitor. Concerning the Maximum Resolution, please refer to specification table in Appendix. Since it has driver software implemented, you don't have to install any additional software. Just PLUG N' PLAY!!! To use it as a PC monitor, your PC and TV should be connected via D-sub cable (15 Pin Analog). For details, please check the Installation section.
Adjusting the PC Picture Settings Setting the Position of PC Picture You can adjust the position of a PC picture manually. Use this function when the picture is not centered or shifted to sides. 1. Press [ ] or [ ] button. 2. Press [ ] or [ ] button and then select 'Position' by pressing [ ] or [ ] button. 3. The position adjustment screen is displayed when you press [ ] or [ ] button. 4. Adjust the position by pressing [ ] or [ ] button and [ ] or [ ] button.
Adjusting the PC Picture Settings Adjusting the PC Picture Settings You can adjust the PC picture, by selecting the preset values or user value. In this Menu, you can adjust Brightness, Contrast and Sharpness. To use the preset values 1. Press MENU button on the remote control. 2. Press [ ] or [ ] button to select [Picture] menu and push [ ] button. 3. Select [Picture Mode] by pressing [ ] or [ ] button and adjust the value with [ ] or [ ] button.
Adjusting the PC Picture Settings Adjusting the Frequency/Fine Tune Use this function to adjust the Frequency range or Phase. To adjust the Frequency by using On Screen Display Menu 1. Press MENU button on the remote control. 2. Press [ ] or [ ] button to select [Picture] menu and push [ ] button. 3. Select [PC] by pressing [ ] or [ ] button and press [ ] button. 4. Press [ ] or [ ] button to select [Frequency] or [Phase]. 5.
Support Timing Table (PC & HDMI) 40
Support Timing Table (PC & HDMI) 41
Troubleshooting If you have a problem setting up or using your LCD TV, you may be able to solve it yourself. Before contacting customer service, try the suggested actions that are appropriate to your problem. 42 What you see... Suggested Actions Screen is blank and power indicator is off Ensure that the power cord is firmly connected and the LCD TV is on. "Check to Signal" message Ensure that the signal cable is firmly connected to the PC(D-Sub) sources. Ensure that the PC(D-Sub) are turned on.
Troubleshooting Problem Suggested Actions No sound Ensure that the audio cable is firmly connected to both the audio-in jack on your monitor and the audioout jack on your sound card. Check the volume level. Sound level is too low Check the volume level. If the volume is still too low after turning the control to its maximum, check the volume control on the computer sound card or software program. Sound is too high pitched or too low pitched Adjust the Treble and Bass to appropriate level.
Specification SPECIFICATION (32") Panel TFT Color LCD Panel Type 697.685 x 392.256mm Display Area 16.7 million Display Color 0.17 x 0.
