Datasheet

ManualsBrandsKübler Automation ManualsAnaloge Einbau-MessgeräteHK 07.20 Micro-hour meter HK 07.20

179

RoHS

www.kuebler.com© Fritz Kübler GmbH, subject to errors and changes. 10/2016

Hour meters /

Timers

Hour meters / timers, electromechanical

Fig. Mounting options Display Protection El. connection Housing Height of ﬁg. Type

1) Panel mount with latch front side IP65, front side ﬂying leads plastic 4 mm [0.16“] HK 07.20

2) PCB mount, lying on the top IP65, front side/on rear solder pins plastic 4 mm [0.16“] HK 07.90

4) PCB mount, upright front side IP65, front side/on rear solder pins plastic 4 mm [0.16“] HK 07.92

5) Base mount, upright front side IP40 ﬂying leads plastic 4 mm [0.16“] AHK 07.00

Type series

The micro timers of the HK 07 and AHK 07 families offer a

particularly large number of variants and can be used in many

different applications thanks to their wide voltage range from

4.5 to 35 V DC.

Available as panel, base and PCB mount versions, they can

be used in many different ﬁelds of application. Thanks to their

encapsulated housing, these non-resettable counters are

extremely tamper-proof.

Characteristics

• 7-digit micro hour meter.

• High shock and impact resistance.

• L

ow power consumption; suitable for battery operation.

• Small dimensions – magniﬁed large ﬁgures.

• Panel-mount counter with integrated spring clip.

• PCB-mount counter.

• Machine-solderable and wash-proof.

• Protection IP65.

Beneﬁts

• Wide voltage range 4.5 ... 35 V DC.

• Count retention in case of power failure.

• Long service life.

Applications

General time measurement, maintenance intervals for measuring

instruments (respiration units, oxygen, dialysis), small appliances,

UV lamps, display panels in vehicles.

1) Panel mount

display front side

3) PCB mount, upright

display front side

2) PCB mount, lying

display on the top

Optional: PCB mount, hanging

display front side

Mounting options and position of the display

4) Base mount, upright

display front side

Micro timers HK 07 / AHK 07Many different installation options (DC)

Accessories Dimensions in mm [inch] Order no.

Gasket 32 x 15 [1.26 x 0.59]

for cut-out 27 x 13 [1.06 x 0.51], suitable for HK 07.20 N511058

Summary of content (3 pages)

PAGE 1
Hour meters / timers, electromechanical Micro timers Many different installation options (DC) HK 07 / AHK 07 The micro timers of the HK 07 and AHK 07 families offer a particularly large number of variants and can be used in many different applications thanks to their wide voltage range from 4.5 to 35 V DC. Available as panel, base and PCB mount versions, they can be used in many different fields of application.
PAGE 2
Hour meters / timers, electromechanical Micro timers Many different installation options (DC) HK 07 / AHK 07 Technical data Electrical connection panel mount flying leads, AWG 22 (red +, black -) approx. 150 mm [5.91“], 6 mm [0.24“] stripped wire ends, tinned PCB mount solder pins 0.4 x 1.2 mm [0.016 x 0.047“], tinned Height of figures 1.2 x 4.0 mm [0.047 x 0.
PAGE 3
Hour meters / timers, electromechanical 13.8 [0.543] Micro timers 2 Many different installation options (DC) HK 07 / AHK 07 Punching28.8 diagram for 3.1 PCB [1.134] (component side) [0.122] 36.3 [1.429] PCB mount, upright / display front side Type HK 07.92 Ø1.6 [0.063] 13.8 [0.543] 13.8 [0.543] 28.8 [1.134] 1 2 28.8 [1.134] 3.1 [0.122] 3.78 [0.149] 1.1 [0.043] 15.24 [0.6] 36.3 [1.429] 28.8 [1.134] [0.063] Type Display HK 07.92 7 digits 1 Electrical connection 0.4 x 1.2 [0.