Datasheet

ManualsBrandsKübler Automation ManualsDigital Panel MetersCODIX 523 Time counter Codix 523

167

RoHS

IP65

10 ... 30 V

DIN 48 x 24

000000

≥ 1 ms

- 20° + 65°

www.kuebler.com© Fritz Kübler GmbH, subject to errors and changes. 10/2016

Hour meters /

Timers

Hour meters / timers, electronic

The Codix 523 is an externally powered timer, hour meter

or short-time meter with 4 start input types and individually

adjustable time base.

The 6-digit LED display shows the NPN, PNP input signals used

for pulse width or time interval measurement.

Powerful

• High accuracy thanks to quartz time base.

• Robust housing – IP65 protected.

• Very bright LED display, 8 mm high.

• Time base can be set individually

- hours, minutes or seconds, the decimal point allows setting

it even more accurately, up to max. 3 decimal places.

- smallest achievable resolution: milliseconds.

- time base hours (minutes and seconds as real-time display).

• Short start-up time – detects incoming pulses already 16 ms

after having been switched on => no loss of pulses in case of a

simultaneous motor start.

• Individually adjustable Start/Stop function

2 Start/Stop inputs allow achieving 4 different measuring

principles such as, for example, active or passive pulse width

measurement, time interval measurement with one single

input or with separate inputs.

User-friendly and universal

• Large keys – pressing either of the keys switches between

displays (can also be operated wearing gloves).

• Programming

- simple uniform menu-driven programming and operation.

- possibility to enter the programming mode also during

operation with an authentication query.

• Manual or electrical reset

Tamper-proof thanks to lockable reset function.

• Freely programmable setpoint

Start time at which time counting begins.

• As an alternative to the HTL inputs, devices with a 4 ... 30 V DC

input level are available, for use as parallel displays for PLCs.

• Optional output: 1 Hz clock pulse in case of active time

measurement.

Order code

Output

1 = Optocoupler

2 = No output

Input switch level

0 = Standard (HTL)

A = 4 ... 30 V DC

Delivery speciﬁcation

· Timer

· Mounting clip

· Gasket

· Instruction manual, multilingual

· Front bezel for screw mounting (T008181) 56 x 40 mm [2.20 x 1.57“], panel cut-out 50 x 25 mm [1.97 x 0.98“]

· Front bezel for clip mounting (T008180) 53 x 28 mm [2.09 x 1.10“], panel cut-out 50 x 25 mm [1.97 x 0.98“]

1) Stock types

6.523 . 01 . 3 XX 0

Power supply Temperature

range

DIN front bezel ResolutionMenu-driven

programming

TimerHigh protection

level

Codix 523h, min, sec or hh.mm.ss (DC)LED timers

Summary of content (3 pages)

PAGE 1
Hour meters / timers, electronic LED timers h, min, sec or hh.mm.ss (DC) Codix 523 The Codix 523 is an externally powered timer, hour meter or short-time meter with 4 start input types and individually adjustable time base. The 6-digit LED display shows the NPN, PNP input signals used for pulse width or time interval measurement. RoHS DC 000000 DIN 48 x 24 - 20° + 65° IP65 DIN front bezel Temperature range High protection level ≥ 1 ms Menu-driven programming Timer Hour meters / Timers 10 ...
PAGE 2
Hour meters / timers, electronic LED timers h, min, sec or hh.mm.ss (DC) Accessories Codix 523 Dimensions in mm [inch] Order no. Adapter front bezel, 72 x 36 [2.83 x 1.42] For cut-out 68 x 33 [2.68 x 1.30] to cut-out 45 x 22.2 [1.77 x 0.87], for counters 48 x 24 [1.89 x 0.94], as set black and silver anodised 162704 Set Adapter front bezel, 48 x 48 [1.89 x 1.89] For cut-out 45 x 45 [1.77 x 1.77] to cut-out 45 x 22.2 [1.77 x 0.87], with clip mounting for counters 48 x 24 [1.89 x 0.
PAGE 3
Hour meters / timers, electronic LED timers h, min, sec or hh.mm.ss (DC) Block diagram Codix 523 Terminal assignment 5 2 3.0 1 2 power supply: 10...30 V DC display A count input B μ processor reset input optional output Keyboard 1 2 3 4 5 1 2 3 4 5 6 7 PIN without optocoupler PIN with optocoupler (NPN) 1 10 ... 30 V DC 1 10 ... 30 V DC 2 0 V GND 2 0 V GND 3 INP A 3 INP A 4 INP B 4 INP B 5 reset 5 reset 6 emitter 7 collector 22 x 45 [0.866 x 1.