Data Sheet
69www.kuebler.com© Fritz Kübler GmbH, subject to errors and changes. 07/2017
Incremental
encoders
Order code
Shaft version
8.5000
Type
. X X X X . XXXX
a b c d e
We offer for all encoders configured with the underlined preferential
options
our free of charge 24one delivery promise
.
Orders placed on working days before 9AM CET are manufactured and
ready for dispatch the same day. The 24one delivery promise is limited to
20 pieces per delivery.
Incremental encoders
Push-pull / RS422 / Open collector
Standard
optical Sendix 5000 / 5020 (shaft / hollow shaft)
a
Flange
5 = synchro flange, IP66/IP67 ø 50.8 mm [2“]
6 = synchro flange, IP65 ø 50.8 mm [2“]
7 = clamping flange, IP66/IP67 ø 58 mm [2.28“]
8 = clamping flange, IP65 ø 58 mm [2.28“]
A = synchro flange, IP66/IP67 ø 58 mm [2.28“]
1)
B = synchro flange, IP65 ø 58 mm [2.28“]
1)
C = square flange, IP66/IP67 63.5 mm [2.5“]
D = square flange, IP65 63.5 mm [2.5“]
G = Euro flange, IP66/IP67 ø 115 mm [4.53“]
2)
1 = servo flange, IP66/IP67 ø 50.8 mm [2“]
3)
2 = servo flange, IP65 ø 50.8 mm [2“]
3)
3 = square flange, IP66/IP67 52.3 mm [2.06“]
3)
4 = square flange, IP65 52.3 mm [2.06“]
3)
E = servo flange, IP66/IP67 ø 63.5 mm [2.5“]
3)
F = servo flange, IP65 ø 63.5 mm [2.5“]
3)
b
Shaft (ø x L), with flat
1 = ø 6 x 10 mm [0.24 x 0.39“]
2 = ø 1/4 x 5/8“ (6.35 x 15.875 mm)
6 = ø 8 x 15 mm [0.32 x 0.59“]
3 = ø 10 x 20 mm [0.39 x 0.79“]
4 = ø 3/8 x 5/8“(9.5 x 15.875 mm)
B = ø 11 x 33 mm [0.43 x 1.30“], with feather key shaft slot
4)
5 = ø 12 x 20 mm [0.47 x 0.79“]
7 = ø 1/4 x 7/8“
3)
8 = ø 3/8 x 7/8“
3)
c
Output circuit / power supply
4 = RS422 (with inverted signal) / 5 V DC
1 = RS422 (with inverted signal) / 5 ... 30 V DC
2 = push-pull (7272 compatible with inverted signal) / 5 ... 30 V DC
5 = push-pull (with inverted signal) / 10 ... 30 V DC
3 = open collector (with inverted signal) / 5 ... 30 V DC
3)
8 = push-pull (7272 compatible with inverted signal), without capacitor /
5 ... 30 V DC
1) 3) 6)
d
Type of connection – cable
1 = axial cable, 1 m [3.28‘] PVC
A = axial cable, special length PVC *)
2 = radial cable, 1 m [3.28‘] PVC
B = radial cable, special length PVC *)
Type of connection – connector
P = axial M12 connector, 5-pin
5)
R = radial M12 connector, 5-pin
5)
3 = axial M12 connector, 8-pin
4 = radial M12 connector, 8-pin
7 = axial M23 connector, 12-pin
8 = radial M23 connector, 12-pin
Y = radial MIL connector, 10-pin
W = radial MIL connector, 7-pin
5)
9 = radial MIL connector, 6-pin
3)
5)
Type of connection – connector with cable
L = radial cable with M12 connector, 8-pin, special length PVC *)
M = radial cable with M23 connector, 12-pin, special length PVC *)
N = radial cable with Sub-D connector, 9-pin, special length PVC *)
*) Available special lengths (connection types A, B, L, M, N):
0.3, 0.5, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 20 m [0.98, 1.64, 3.28, 6.56, 9.84,
13.12, 16.40, 19.69, 26.25, 32.80, 39.37, 49.21, 65.62‘]
order code expansion .XXXX = length in dm
ex.: 8.5000.814A.1024.0030 (for cable length 3 m)
e
Pulse rate
1, 2, 4, 5, 10, 12, 14, 20, 25, 28, 30, 32, 36, 50, 60, 64, 80, 100, 120, 125,
150, 180, 200, 240, 250, 256, 300, 342, 360, 375, 400, 500, 512, 600,
625, 720, 800, 900, 1000, 1024, 1200, 1250, 1500, 1800, 2000, 2048,
2500, 3000, 3600, 4000, 4096, 5000
(e.g. 100 pulses => 0100)
Optional on request
- other pulse rates
- Ex 2/22
7)
- surface protection salt spray
Salt spray tested as standard type
(deliverable as from 1 unit)
8.5000.73X4.XXXX-C
1) 24one type only in conjunction with shaft type 1.
2) Only in conjunction with shaft type B.
3) US version.
4) Only in conjunction with flange type G.
5) Without inverted signal.
6) Attention: no CE types!
7) For the cable connection type, cable material PUR.