Datasheet

ManualsBrandsKübler ManualsAngle & Rotary SensorsDraw Wire Encoder 5m CANopen 30V

540

RoHS

-40°

...

+85°C

IP67

www.kuebler.com © Fritz Kübler GmbH, subject to errors and changes. 09/2017

Linear measuring technology

1) Available from 09/2017.

2) Only in conjunction with type of sensor A44 and R44.

Measuring length up to 5 m

integrated inclinometerDraw wire encoder C100

Draw wire mechanics

with redundant sensors

Thanks to its robust design and its high IP67 protection level,

the draw wire encoder C100 reliably provides accurate length

measurement. Its simple and optimal integration in the application

is a particular highlight of this product. Many additional options,

ranging from the integrated inclinometer up to the relay output, are

available.

To increase plant availability, this draw wire encoder allows

combining a redundant system in a very compact housing.

Characteristics

• Measuring length up to 5 m.

• Integrated inclinometer.

• Redundant sensors.

• Different types of sensors (analog, incremental, CANopen,

relay output, switch output).

• Linearity up to ±0.1 % of the measuring range.

• High protection level IP67 and wide temperature range from

-40°C ... +85°C.

Advantages

• The suitable measuring length for every application.

• Cost, space and installation work saving.

• For even higher plant availability.

• Simple selection and fast installation.

• High accuracy at economic prices.

• Reliability and long service life for outdoor applications.

High protection

level

Shock / vibration

resistant

Redundancy Relay outputWide tempera-

ture range

Order code

with analog sensor

Order code with CANopen

and inclinometer

D8.

XXXX

XXX

RC1

1 X

000

d e

Measuring length

0100 = 1 m

0200 = 2 m

0300 = 3 m

0400 = 4 m

0500 = 5 m

Measuring length

0100 = 1 m

0200 = 2 m

0300 = 3 m

0400 = 4 m

0500 = 5 m

Sensor type

A22 = 0 ... 10 V

A44 = 0.5 ... 4.5 V

R22 = 0 ... 10 V, redundant

R44 = 0.5 ... 4.5 V, redundant

Sensor type

RC1 = CANopen redundant

Type of connection

1 = M12 connector, 5-pin

Power supply

1 = 9 ... 30 V DC

2 = 5 V DC

Type of connection

1 = M12 connector, 5-pin

Power supply

1 = 9 ... 30 V DC

Inclinometers

0 = none

1 = 1 inclinometer

2 = 2 inclinometers

C100

Switching

outputs

Summary of content (5 pages)

PAGE 1
Linear measuring technology Draw wire mechanics with redundant sensors Measuring length up to 5 m integrated inclinometer Draw wire encoder C100 Thanks to its robust design and its high IP67 protection level, the draw wire encoder C100 reliably provides accurate length measurement. Its simple and optimal integration in the application is a particular highlight of this product. Many additional options, ranging from the integrated inclinometer up to the relay output, are available.
PAGE 2
Linear measuring technology Draw wire mechanics with redundant sensors Draw wire encoder C100 D8. C100 . XXXX . XXX X . 1 000 Order code with incremental output b I11 I12 I21 I22 a Sensor type = incremental AB, 512 ppr = incremental ABZ, 512 ppr = incremental AB, 1024 ppr = incremental ABZ, 1024 ppr d c Type of connection 1 = M12 connector, 5-pin 3 = radial cable, 2 m [6.56‘] d Output circuit / Power supply 1 = TTL / 9 ...
PAGE 3
Linear measuring technology Draw wire mechanics with redundant sensors Draw wire encoder C100 Measuring length up to 5 m integrated inclinometer Technical data Mechanical characteristics (draw wire mechanics) material diameter Measuring wire Wire fastening internal diameter outer diameter height 1.0 ... 5.0 m Power supply AISI304 steel wire Nylon coated ø 0.9 mm ø 0.61 mm (ABZ Incremental) 9 ... 30 V DC 5 V DC ±10 % 2) Electromagnetic compatibility acc.
PAGE 4
Linear measuring technology Draw wire mechanics with redundant sensors Measuring length up to 5 m integrated inclinometer Draw wire encoder C100 Terminal assignment Sensor type A22, A44, R22, R44 (analog sensor) Sensor type I11, I12, I21, I22 (incremental output) Sensor type I11, I12, I21, I22 (incremental output) Sensor type RC1 (CANopen) Sensor type RL1 (relay) Type of connection M12 connector, 5-pin 1 Signal: +V n.c.
PAGE 5
Linear measuring technology Draw wire mechanics with redundant sensors Measuring length up to 5 m integrated inclinometer Draw wire encoder C100 Technology in detail Inclinometer with option RC1 Setting possibility 360° Setting possibility ±180° Redundant signals possible. Setting possibilities: · Switching between setting possibilities 180° and 360°. · Switching between synchronous and asynchronous output. · Change of direction of rotation (cw/ccw). · Setting and resetting an offset.