Installation Instructions

side gear,
3
TRANSMISSION
0302P073
8177F241
81700·82100·82400
WSM,11770
Removing Differential
1. Remove the bearing holder mounting screws and remove the
differential bearing holder (1).
2. Remove the differential assembly.
(When reassembling)
• Install
the differenti I assembly, noting the number of shims
(2) in the differentia case left side and differential bearing
holder.
17.7 to 20.6 N'm
1.8to2.1 kgf.m
13.0 to 15.2 ft-Ibs
(2) Shim
t and left bearings from the differential
(When re sembling)
•
Apply iquid lock (Three Bond 1324B or equivalent) to the
spiral evel gear UBS scre s.
29.4 to 34.3 N'm
3.0 to 3.5 kgf'm
21.7 to 25.3 ft-Ibs
Differential Case
D fferential Side Gear and Differentia Pinion
. Put parting marks on
the differen ial pinion (1) and the
differential side gear (2).
2. Tap out the dowel pin (3).
3. Remove the differential pinion shaft.
4. Remove the differential pinion (4), diffe ential side gear (2)
and shim (5).
(When reassembling)
• Install
the differential pinion
aligning the parting marks.
(1) Differential Pinion
(2)
Differential Side Gear
(3)
Dowel Pin ()
;(~llq L~ vf
IL~ 1- c;t
3-S36
(4) Differential Pinion
(5) Shim