Installation Instructions

1 ENGINE
Crankshaft (Continued)
B1700·B21 00·B2400 WSM, 11770
Item
Factory Specification Allowable Limit
Oil clearance between crank pin and crank pin
0.029 to 0.091 mm
0.2mm
bearing
0.0011
to 0.0036 in. 0.0079 in.
Crank
pin 0.0.
39.959 to 39.975 mm
-
1.5732 to 1.5738 in.
Crank
pin bearing 1.0.
40.004 to 40.050 mm
-
1.5750 to 1.5768 in.
Crankshaft side clearance
0.15
to 0.31 mm 0.5mm
0.0059 to 0.0122 in.
0.0197 in.
Cylinder Liner
Cylinder liner 1.0.
0905-010
72.000 to 72.019 mm
+0.15mm
2.8346 to 2.8354 in.
0.0059 in.
01005-010 76.000
to 76.019 mm
2.9921
to 2.9929 in.
01105-010 78.000
to 78.019 mm
3.0709
to 3.0716 in.
Oversized cylinder
liner 1.0.
+0.5 mm
0.0197 in.
[2] LUBRICATING SYSTEM
Oil Pump
Engine oil pressure
Atidle 49 kPa
-
speed
0.5 kgf/cm
2
,
7 psi
At rated 196 to 441 kPa
147.1 kPa
speed
2.0
to 4.5 kgf/cm
2
1.5 kgf/cm
2
36to 64 psi
27 psi
Clearance between inner rotor and outer rotor 0.06toO.18mm
-
0.0024 to 0.0071 in.
Clearance
between outer rotor and pump body 0.100 to 0.180 mm
-
0.0039 to 0.0071 in.
End clearance between inner rotor and cover 0.025 to 0.075 mm
-
0.0098 to 0.00295 in.
[3] COOLING SYSTEM
Thermostat
Thermostat's valve opening temperature 80.5 to 83.5°C
-
176.9 to 182.3°F
Temperature
at which thermostat completely
95°C
-
opens
203°F
1-58