Operation Manual

38 HYDRAULIC UNIT
• Hydraulic Control Unit Use Reference Chart
in order to handle the hydraulics properly, the operator must be familiar with the following. Though this information may not
be applicable to all types of implements and soil conditions, it is useful for general conditions.
Implement
Moldboard plow
Disc plow
Narrower (spike,
springtooth, disc
type)
Sub-soiler.
Weeder, ridger
Earthmover,
digger, scraper,
manure fork, rear
carrier
Mower (mid-and
rear-mount type),
hayrake, tedder...
1AGAIAZAP122A
Soil condition
Light soil
Medium soil
Heavy soil
1AGAEEAAP030B
Top link mounting
holes
(1) is standard.
(2) is used only
when there is
some obstacle
that prevents you
from using the
standard.
1AGAEEFAP027F
(1) Position
control lever
Position control
1AGAIAZAP070A
Gauge
wheel
YES/NO
YES
YES/NO
1AGAEEAAP029C
Telescopic
stabilizers
Loose
Tighten
Remarks
Insert the set-pin
through the slot on
the outer tube that
align with one of the
holes on the inner
bar.
For implements
with gauge wheels,
lower the
implements to the
ground.
Telescopic
stabilizer should be
tight enough to
prevent excessive
implement
movement when
implement is in
raised position.
For implements
with gauge wheels,
lower the
implements to the
ground.