Installation Instructions

B1700·B21 00·B2400 WSM, 11770
[1] FEATURES
2 CLUTCH
This tractor is used dry single plate type clutch.
The clutch is located between the engine and
transmission and is operated by stepping on the
clutch pedal.
When the clutch pedal is depressed, the clutch is
disengaged and when it is released, the clutch is
engaged and power from the engine is transmitted
to the transmission.
(5) Pressure Plate Assembly
(6) Clutch Release Bearing
(7) Clutch Release Hub
plate assembly. Then, the torque is transmitted to
the transmission via the clutch shaft (9).
When the pedal (13) is depressed, the clutch
release hub (7) and the clutch release bearing (6)
move towards the flywheel and push the fingers of
the diaphragm spring (4). In other words, this
movement pulls the pressure plate (3) up and
disengages the clutch.
B177F201
[2] LINKAGE MECHANISM
B177F202
(1) Engine Flywheel
(2) Clutch Cover
(3) Pressure Plate
(4) Diaphragm Spring
Engine torque is transmitted to the pressure plate
assembly (S) via the flywheel (1) which is connected
to the engine crankshaft. Therefore, the clutch cover
constantly runs with engine. The clutch disc(10} is
located between the flywheel (1) and the pressure
plate (3) of pressure plate assembly. Torque is
transmitted to the clutch disc (10) by the pressure
created by diaphragm spring (4) installed in pressure
(1) Clutch Disc
(2) Pressure Plate Assembly
(3) Release Bearing
®r
® 5
@
(8) Clutch Release Fork
(9) Clutch Shaft
(10) Clutch Disc
(4) Release Rod
(5) Release Fork
(6) Clutch Rod
(11) Clutch Rod
(12) Clutch Adjusting Bolt
(13) Clutch Pedal
2-M1