Installation Instructions

3 TRANSMISSION B1700·B2100·B2400 WSM,11770
Battery, Oil Cooler and Hydraulic Pipes (HST Type)
1. Disconnect the battery cords (1) and dismount the battery
(2).
2. Loosen the clamps and remove the battery base (6) with oil
cooler
(3) then remove the delivery pipe (4) and return pipe
(5).
• NOTE
• When disconnecting the battery cords, disconnect the
grounding cord first. When connecting the positive cord
first.
(1) Battery Cord (4) Delivery Pipe
(2) Battery (4) Return Pipe
(3) Oil Cooler
Steering Wheel
1. Remove the steeri ng wheel cap.
2. Remove the steering wheel mounting nut and remove the
steering wheel with a steering wheel puller. (Code No :
07916-51090)
(When reassembling)
Steering wheel
29.4 to 49.0 N'm
Tightening
torque
3.0 to 5.0 kgf'm
mounting nut
21.7 to 36.2 ft-Ibs
Meter Panel and Panel Under Cover
1. Remove the meter panel (2) and disconnect the meter panel
connector (3) and
hour-meter cable (7) from the meter
panel. Then remove the meter panel.
2. Tap out the spring pin and remove the hand accelerator lever
(1 ).
3. Disconnect the combination switch connector (4) and main
switch connector (5).
4. Remove the panel under cover mounting screw and remove
the panel under cover (6).
(1) Hand Accelerator Lever
(2)
Meter Panel
(3)
Meter Panel Connector
(4) Combination Switch Connector
3-S12
(5) Main Switch Connector
(6) Panel Under Cover
(7)
Hour-meter Cable