Installation Instructions

B1700·B2100·B2400 WSM,11770
B177P103
3 TRANSMISSION
Swashplate
1. Remove the swashplate (1) from the housing.
2. Remove the thrust plate (4), thrust roller bearing (3) and
thrust washer
(2) from the swashplate.
(When reassembling)
• Apply clean hydrostatic transmission oil to the thrust roller
bearing.
•
Place the swashplate (1) into the housing, align the groove of
swashplate and slot guide by keeping the slot guide from
moving with a screw driver.
NOTE
• Take care not to damage the housing.
Slot Guide, Cradle Bearing and Trunnion
Arm
1. Remove the slot guide (2) from the trunnion arm.
2. Remove the cradle bearing (1) from the housing.
3. Remove the trunnion arm (3).
4. Remove the oil seal (4) with a screw driver.
(When reassembling)
• Apply clean hydrostatic transmission oil
to journal bearing,
trunnion arm and cradle bearing.
B083P069
B177P106
(1) Swash plate
(2) Thrust Washer
(1) Cradle Bearing
(2) Slot Guide
3-S25
(3) Thrust Roller Bearing
(4) Thrust Plate
(3) Trunnion Arm
(4) Oil
Seal