Installation Instructions

3 TRANSMISSION
B1700·B21 00·B2400 WSM,11770
14.22
to 23.54 N'm
Tightening
torque
Charge relief valve plug
1.45
to 2.40 kgf'm
10.49to 17.36ft-lbs
Pump Shaft
1. Remove the internal snap ring (1).
2. Tap the pump shaft (2) with a plastic hammer slightly to slide
out it from the housing.
Charge Relief Valve
1. Remove the charge relief valve plug (1).
2. remove the spring (2) and charge relief corn (3).
(When reassembling)
•
NOTE·
• If shims are placed at the bottom of the relief valve plug
bore, place them
as they are.
• Take care
not to damage the a-ring on the relief plug.
(2) Pump Shaft
(1) Internal Snap
Ring
B177P109
(1) Plug
(2) Spring
(3) Charge Relief Corn
3-S26