Installation Instructions

B1700·B21 00·B2400 WSM, 11770 3 TRANSMISSION
Separating Hydraulic Cylinder and Rear Axle Case
1. Remove the external snap ring and remove the auxiliary
speed change lever (1) with rod, rear-PTO shift lever (2) and
mid-PTO shift lever
(3).
2. Remove the hook and connecting plate (4).
3. Remove the top link bracket (5).
4. Remove the hydraulic cylinder mounting screws and
dismount the hydraulic cylinder assembly (6).
5. Disconnect the differential lock rod and remove the
differential lock pedal support (7) with differential lock
pedal
(8).
6. Remove the drawber frame mounting screws and remove
the drawber frame
(9).
(When reassembling)
• Apply liquid gasket (Three Bond 1208D
or equivalent) to
joint face of the differential case and the rear axle case,
differential case and the hydraulic cylinder.
Hook and connecting
39.2to44.1 N'm
plate
mounting screw
4.0
to 4.5 kgf'm
and nut
28.9 to 32.5 ft-Ibs
Top link bracket
77.5
to 90.1 N'm
7.9
to 9.2 kgf'm
mounting screw
57.2
to 66.5 ft-Ibs
Hydraulic cylinder
39.2to44.1 N'm
4.0
to 4.5 kgf'm
mounting screw
28.9
to 32.5 ft-Ibs
Tightening torque
Differential lock pedal
17.7to20.6N·m
1.8 to 2.1 kgf'm
support mounting screw
13.0
to 15.2 ft-Ibs
Rear axle
case mounting
39.2
to 44.1 N'm
4.0
to 4.5 kgf·m
screw
28.9
to 32.5 ft-Ibs
Drawber frame
62.8to 72.5 N·m
mounting screw
6.4
to 7.4 kgf'm
46.3 to 53.5 ft-Ibs
(1) Aux. Speed Change Lever
(2) Rear-PTO Shift Lever
(3) Mid-PTO Shift Lever
(4) Connecting Plate
(5) Top Link Bracket
3-S27
(6) Hydraulic Cylinder Assembly
(7) Differential Lock Pedal Support
(8) Differential Lock Pedal
(9) Drawber Frame