Installation Instructions

3 TRANSMISSION
B1700·B2100·B2400 WSM.11770
B177P118
Separating Mid-PTO Case and Transmission Case
1. Remove the mid-PTO case mounting screws and separate the
mid-PTO case (1) from transmission case.
2. Remove the transmission case mounting screws and nuts and
separate the transmission case (2) from the differential case
(3).
(When reassembling)
• Apply liquid gasket (three Bond 1208D or equivalent)
to joint
face of the transmission case, differential case and mid-PTO
case.
Mid-PTO case mounting
screw
39.2
to 44.1 N'm
Tightening
torque
4.0 to 4.5 kgf'm
Tra nsm ission case
28.9 to 32.5 ft-Ibs
mounting screw and nut
(1) Mid-PTO Case
(2) Transmission Case
(3) Differential Case
Bearin~ support
39.2 to44.1 N'm
Tightening
torque
4.0 to 4.5 kgf'm
mounting screw
28.9
to 32.5 ft-Ibs
2nd Gear Shaft and 17TShifter Gear
1. remove the 2nd gear shaft (1) with beari ngs.
2. Remove the bearing (2), 17T shifter gear (3) and shift fork (4)
with shift rod.
3. Remove the shift lever (5).
Bearing Holder
1. Remove the external snap ring and remove the 27T gear (1).
2. Remove the bearing holder mounting screws and remove the
bearing holder (2).
(When reassembling)
(4) Shift Fork
(5) Shift Lever
(2) Bearing Holder(1) 27TGear
(1) 2nd Gear Shaft
(2) Bearing
(3) 17T Shifter Gear
B177P121
B177P122
3-S28