Installation Instructions

81700·82100·82400 WSM,11770
3 TRANSMISSION
39.2 to 44.1 N'm
4.0
to 4.5 kgf'm
28.9 to 32.5 ft-Ibs
Rear-PTO Cover Assembly
5th Gear Shaft
(7) Interlocker
(8) Shift Arm Stopper
(9) Shift Arm
(10)
ShiftShaft
(11) Differential Lock Pedal Shaft
(12) Dowel
Pin
Cotter Pin
Spring
8all
Shift
Rod
1st-Reverse Gear Shif ork
2nd-3rd Gear Shift F rk
Tightening
torque
8177F240
Main Gear Shift Fork
1. Remove the cotter pin (1) and remove the spring (2) and ball
(3).
2. Draw out the shift rod (4) and remove the 1st-reverse gear
shift
fork (5).
3. Remove the 2nd-3rd gear shift fork (6), in the same way as
the 1st-reverse shift fork removing procedure.
4. Take out the interlocker (7) and slide the shift arm stopper
(8) and then remove the shi arm (9).
5. Remove the shift shaft (10)
6. When remove the differe tial lock pedal shaft (11) draw out
the dowel pi n (12) fi rst.
5th Gear Shaft nd
Rear-PTO Shaft
1. Remove the ternal snap ring (1) and one-way clutch cam
(2) (Manual Tr nsmission Type).
2. Remove the re r-PTO cover mounting screw and remove the
rear-PTO cover ( ) assembly.
(When reassemblin )
•
Apply liquid gask t (Three Bond 1208D or equivalent) to
joint face of differ tial case and rear-PTO cover.
•
NOTE
• Do not tighten the r ar-PTO cover mounting screws before
reassembling
the diff ential case and transmission case.
(1) External Snap Ring
(2) One-way Clutch
Cam j)
~;J /d. c c.-- c:(/
;;{ ~ /- f:6
8177P162
8177Pl19
3-S35