Installation Instructions

G GENERAL
(1) Front Wheel Mounting Nut
(2) RearWheel Hub Mounting Nut
(3) Cotter Setting Bolt and Nut
(1) Battery
B1700·B2100·B2400 WSM,11770
Checking Wheel Mounting Screws and Nuts Tightening Torque
A CAUTION
To avoid personal injury:
• Never operate tractor with a loose rim, wheel, or axle.
• Any time bolts and nuts are loosened, retighten to specified
torque.
• Check all bolts and nuts frequently and keep them tight.
1. Check wheel bolts and nuts regularly especially when new. If
there are loosened, tighten as follows.
Front wheel mounting
77to90 N'm
7.9 to 9.2 kgf·m
nuts
57 to 67 ft-Ibs
Rear wheel hub
108to 125 N'm
Tightening torque
mounting nuts
11.0 to 12.8 kgf'm
80 to 93 ft-I bs
Cotter setting bolt and
123 to 147 N'm
12.6
to 15.0 kgf'm
nut
91 to 108 ft-Ibs
Checking Battery Condition
A CAUTION
To avoid personal injury:
• Never remove the vent plugs while the engine is running.
• Keep electrolyte away from eyes, hands ana clothes, If you
are spattered
with it, wash it away completely with water
immediately and get medical attention.
• Wear eye protection and rubber gloves when working
around battery.
1. Mishandling the battery shortens the service life and adds to
maintenance costs.
2. The original battery is maintenance free type battery, but
need some servicing.
If the battery is weak, the engine is difficult to start and the
lights become dim.
It is important check the battery
periodically.
G-16