Installation Instructions

81700·82100·82400 WSM, 11770
CHECKING, DISASSEMBLING AND SERVICING
[1] SEPARATING THE ENGINE
1 ENGINE
Draining Cooling Water
A CAUTION
.. Never open the radiator cap while operating or immediately
after stopping. Otherwise,
hot water will spout out from
the radiator. Wait for more than ten minutes to cool the
radiator, before opening the cap.
1. Loosen the drain cock (2) from the radiator hose to drain
cooling water.
2. Remove the radiator cap (1) to drain cooling water
completely.
Draining Engine Oil
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. Remove the drain plug (1) to drain oil.
4. Screw in the drain plug (1).
(When refi II ing)
.. Fill the engine oil up to the upper line on the dipstick (3).
II IMPORTANT
.. Never mix two different type of oil.
.. Use the proper SAE Engine Oil according to ambient
temperature.
Refer
to "LUBRICANTS, FUEL AND COOLING WATER". (See
page G-8)
[AI Oil level is acceptable within this range.
8177FG01
Coolant Capacity
(1) RadiatorCap
Engine oil capacity
(1) Drain Plug
(2) Oil Inlet Plug
1-S 11
3.41
3.6 U.S. qts.
3.0Imp.qts.
(2) Drain Cock
3.01
3.2 U.S. qts.
2.6Imp. qts.
(3) Dipstick