Installation Instructions

1 ENGINE
81700·82100'82400 WSM,11770
separating Front Axle Assembly
1. Remove the front axle frame mounting screws and separate
the
front axle assembly from the engine.
(When reassembling)
Front axle frame
39.2 to 64.7 N'm
Tightening torque
mounting screw
4.0 to 6.6 kgf'm
28.9 to 47.7 ft-Ibs
Steering Wheel
1. Remove the steering wheel cap.
2. Remove the steering wheel mounting nut and remove the
steering wheel
with a steering wheel puller (Code No. 07916-
51090).
(When reassembling)
Steering wheel
29.4 to 49.0 N'm
Tightening torque 3.0 to 5.0 kgf'm
mounting nut
21.7 to 36.2 ft-Ibs
Fuel Tank
1. Remove the fuel tank frame stay (1).
2. Disconnect the regulator and hazard unit connectors and
remove the lead wire
for fuel gauge.
3. Remove the fuse box (4).
4. Disconnect the overflow hoses (5) of fuel line.
5. Remove the tank flame with fuel tank (3).
Meter Pedal and Panel Under Cover
1. Remove the meter panel (2) and disconnect the meter panel
connector (3) and
hour-meter cable (7) from the meter
panel. Then remove the meter panel.
2. Tap out the spring pin and remove the hand accelerator lever
(1 ).
3. Disconnect the combination switch connector (4) and main
switch connector
(5).
4. Remove the panel under cover mounting screw, and take off
the panel under cover (6).
(1) Hand Accelerator Lever
(2) Meter Panel
(3) Meter Panel Connector
(4) Combination Switch Connector
(1) Fuel Tank Frame Stay
(2) Fuel Tank Flame
(3) Fuel Tank
1-$ 14
(5) Main Switch Connector
(6) Panel Under Cover
(7) Hour-meter Cable
(4) Fuse 80x
(5) Overflow Hose