Installation Instructions

ManualsBrandsKubota ManualsMiscellaneousB2400

B1700·B21 00·B2400 WSM, 11770

B177FM10

(2) Check Point

of

Initial

50

Hours

M MOWER

Greasing Belt Tension Pulley

1.

Grease

the

grease nipple (1)

of

the

belt tension pulley

if

the

amount

of

grease

is

insufficient.

(1)

Grease

Nipple

Greasing Belt Tension Pivot

1.

Grease

the

grease nipple (1)

of

the

belt tension

pivot

if

the

amount

of

grease

is

insufficient.

(1)

Grease

Nipple

Greasing Lift Arms

1.

Grease

the

grease nipples (1)

of

the

lift

arms

if

the

amount

of

grease

is

insufficient.

(1)

Grease

Nipple

Changing Gear Box Oil

1.

Dismount

the

mower

from the tractor, and place

the

mower

on level ground.

2. Remove

the

oil

filler

plug (2).

3. Remove the drain plug (1), and drain

the

used

oil completely.

4.

After

draining

the

used

oil, reinstall the drain plug.

5.

Fill

with

new

oil up

to

the specified level.

II

IMPORTANT

..

Use

the specified gear oil.

Refer

to

"LUBRICANTS".

(See

page M·S2.)

(1)

Drain

Plug

M-SS

(2)

Oil Filler

Plug