Installation Instructions

B1700·B21 00·B2400 WSM, 11770 M MOWER
[7] SPECIAL TOOLS
press fit the
A
43 mm
1.69 in.
B
42 mm
1.65 in.
C
28 mm Dia.
1.10 in. Dia.
D
22.90
to 22.95 mm Dia.
0.9016
to 0.9035 in. Dia.
E
19.90to 19.95 mm Dia.
0.7835
to 0.7854 in. Dia.
F
42mm
1.65 in.
G
28 mm Dia.
1.10 in. Dia.
H
19.90to 19.95 mm Dia.
0.7835
to 0.7854 in. Dia.
C1
2.0mm
0.079 in.
C2
1.0mm
0.039 in.
C1, C2 : Chamfer
180 (7.09)
180 (7.09)
C t-----'~C2
B177FM56
III NOTE
• The following special tools are not provided, so make them referring to the figures.
Unit: mm (in.) Tension Arm Bushing Replacing Tool
Application:
Use to press out and to
tension arm bushing.
Unit: mm (in.)
200 (7.87)
J-" cl ~C2
B177FM57
200 (7.87)
C1, C2 : Chamfer
Front Gauge Wheel Bushing Replacing Tool
Application: Use to press out and to press fit the
front gauge wheel bushing.
A
46mm 1.81 in.
B
45mm
1.77 in.
C
40 mm Dia.
1.57 in. Dia.
D
33.90
to 33.95 mm Dia.
1.3346
to 1.3366 in. Dia.
E
29.90 to 29.95 mm Dia.
1.1772to1.1791
in.Dia.
F
45mm
1.77 in.
G
40 mm Dia.
1.57 in. Dia.
H
29.90 to 29.95 mm Dia.
1.1772
to 1.1791 in. Dia.
C1
2.0mm
0.079 in.
C2
1.0mm
0.039 in.
Rear Link Bushing Replacing Tool
Application:
Use to press out and to press fit the
rear link bushing.
A
92 mm
3.62 in.
B
90mm
3.54 in.
C
28 mm Dia.
1.10 in. Dia.
D
22.90
to 22.95 mm Dia.
0.9016
to 0.9035 in. Dia.
E
19.90to 19.95 mm Dia.
0.7835
to 0.7854 in. Dia.
F
90mm
3.54 in.
G
28 mm Dia.
1.10in.Dia.
H
19.90to 19.95 mm Dia.
0.7835
to 0.7854 in. Dia.
C1
2.0mm
0.079 in.
C2
1.0mm 0.039 in.
Unit: mm (in.)
C1, C2 : Chamfer
250 (9.84)
j..-----.---" G 1_~C2
C1
B177FM58
M-S7