Installation Instructions

81700'82100·82400 WSM, 11770 M MOWER
Setting Mower
1. Turn the steering wheel fully left.
2. Install the mower from right side ofthe tractor.
3. Roll the mower under the tractor, and then return the
steering wheel.
8177FM27
1
3
8177FM29
Front Link
1. Hook the front link (3) with the clevis pin section to front end
of the groove (2), and then turn the stopper (4) as shown in
the figure.
(Reference)
• Make sure the length (L) ofthe front link (3) is as follows.
RC54-24B: 505 mm (19.9 in.)
RC60-24B: 500 mm (19.7 in.)
(1) Stay (3) Front Link
(2) Groove (4) Stopper
Mounting Front Link
1. Push down the link fixing lever, pulling the L-pin.
2. Hook the front link (2) to the lever fulcrum, and turn the link
fixing lever(1).
3. Return the L-pin (3).
II NOTE
.. Make sure the link fixing lever (1) is fixed with L-pin (3)
securely.
Mounting Universal Joint and
Rear Link
1. Pull back the coupler (1) of the universal joint.
2. Push the universal joint (3) onto the mid PTa shaft, and
release the coupler
(1).
3. Slide the universal joint back and forward to make sure the
universal
joint is locked securely.
4. Lower the rear links.
5. Attach the rear links (4) to the mower deck, pull ing the L-pins
(2).
B177FM31
(1) Coupler
(2) L-pin
(1) Link Fixing Lever
(2) Front Link
M-S11
(3) Universal Joint
(4) Rear Link
(3) L-pin