Installation Instructions

ManualsBrandsKubota ManualsMiscellaneousB2400

M

MOWER

B1700·B21 00'B2400 WSM, 11770

B177FM32

B177FM29

(5) Rear Stopper

(6) Connecting

Rod

(7) Turnbuckle

Adjusting Front Link and Connecting

Rod

A

CAUTION

• Before starting the engine, change the mid

PTO

and gear

shift

lever into neutral.

• Shut

off

the engine and

allow

the

mower

blades

to

stop

before making adjustments.

1.

Park

the tractor on level ground

with

the mower touching

the ground.

2.

Set

the height

ofthe

four

mower gauge wheels the

same.

3.

If

the

front

gauge wheels are

not

on the ground, remove the

front

link from the mower. And adjust the length

(L)

of

the

front

link

(1)

until the

front

gauge wheels come into contact

with

the ground.

4.

Attach the

front

link

to

the

mower.

5.

Start the engine.

6.

Lift the mower

to

the maximum

lifting

position and shut

off

the engine.

7.

Adjust the turnbuckles

(7)

of

the

left

and

right

connecting

rods

(6)

so

that

the

clearances are

within

the

factory

spedficati

ons.

(1) Front Link

(2)

Mid

Hanger Bracket

(3) Front Stopper

(4) Tractor Frame

Clearance (A) between

2to

5 mm

front

stopper and mid

Factory

spec.

0.08

to

0.20 in.

hanger bracket

Clearance (8) between

5to

10

mm

rear

st0frper and

Factory

spec.

0.20

to

0.39 in.

tractor

rame

II

IMPORTANT

• Proper adjustment

for

the

connecting rod

length

is

very

important

to

avoid damage

to

the mower

lifting

system.

B177FM33

B177FM25

M-S12