Installation Instructions

B1700·B2100·B2400 WSM, 11770
S
ill
c H
c I
B177FM36
M MOWER
Adjusting Cutting Height
1. The cutting height can be adjusted from 38 mm to 102 mm
(from
1.5 in. to 4.0 in.).
2. To adjust the cutting height, lift the mower slightly and close
the 3-point lowering
speed knob (1).
3. Adjust the cutting height with the front gauge wheels, rear
gauge
wheel, anti-scalp wheel and anti-scalp rollers as
shown in the table below.
The recommended cutting height is approx. 50 mm (2.0 in.).
Cutting height
Front gauge
Rear gauge
Anti-scalp
Anti-scalp
wheel
wheel
wheel
roller
38 mm (1.5 in.)
c-x
1
a -x
I
51 mm (2.0 in.)
C-Y 2
64
mm (2.5 in.) B-X
3
b -x
II
76 mm (3.0 in.) B-Y
4
89
mm (3.5 in.) A-X
5
c -x III
102 mm (4.0 in.) A-Y
6
_IMPORTANT
.. After adjusting the cutting height, open the 3-point
lowering speed knob (1) and adjust the lowering speed of
the mower.
(1) 3-point Lowering Speed Knob
Adjusting Front Link and Connecting Rod
1. See page M-S 12.
M-S15