Installation Instructions

M MOWER
B1700·B21 00·B2400 WSM, 11770
Gear box mounting
78.5 to 88.2 N'm
Tightening torque
8.0 to 9.0 kgf'm
screw
57.9 to 65.1 ft-Ibs
Blade Boss
1. Remove the external snap ring (2).
2. Remove the blade boss (1).
Gear Box and
Mower Belt
1. Turn over the mower.
2. Remove the tension spri ng (4).
3. Unscrew the left and right gear box mounting screws (3), (S)
and remove the gear box (2) from the mower deck.
4. Remove the mower belt (1).
(When reassembling)
• Install
the reamer screws (3) at their original positions as
shown in the figure.
(4) Tension Spring
(5) Gear Box Mounting Screw
(2) External Snap Ring
(1) Blade Boss
(1) Mower Belt
(2) Gear Box
(3) Gear Box Mounting Screw
(Reamer Screw)
B177FM44
B177FM43
B177FM45
M-S18