Installation Instructions

G GENERAL
[2] LUBRICANTS, FUEL AND COOLING WATER
B1700·B2100·B2400 WSM,11771
Capacity
Place
I I
Lubricants, fuel and cooling water
B1700 B2100 B2400
Front axle
case
4.58
KUBOTA SUPER UDTfluid * or
[4WD, Bi-speedl
4.8 U.S.qts.
SAE 80, 90 gear oil
4.0Imp.qts.
* KUBOTA original transmission hydraulic fluid
Greasing
No.
of greasing point Capacity Type of grease
Knuckle shaft
SAE multi purpose type
(2WD Type)
2
-
2
Moderate
amount
grease
Front axle support
(2WD Type)
[3] MA!NTENANCE CH ECK LIST
Indication on hour meter
After
Check point
(Change or check every interval shown below)
purchase
Reference
No.
1
2
page
50 100 150 200 250 300 350 400 450
500
550 600
650
700 750 BOO
year
years
1 Greasing
0 0
0
0 0 0 0
0
0 0 0 0 0 0 0 0
DG-2
2
Front axle
case oil (4WD)
0 0
DG-3
3
Greasing (2WD
front wheel
0 0
DG-3
hub)
[4] CHECK AND MAINTENANCE
A CAUTION
It Be sure to check and service the tractor on a flat place with engine shut off, the parking brake on and
chock
the wheels.
(1) Check Points of Every 50 Hours
Greasing
1. Apply grease to the following points. (2WD Type)
(1) Knuckle Shaft
Grease Nipple
(2) Front Axle Support
Grease Nipple
DG-2