Installation Instructions

2 CLUTCH
B1700·B2100·B2400 WSM,11771
CLUTCH
SERVICING
10mm
0.39 in.
(3) Bi-speed Turn Cable
Factory
spec.
Distance: "B"
(1) Spring Lock Pin
(2) Lock Nut
(Reference)
Propeller Shaft Cover and Coupling on
2-56 are altered as explained below.
Bi-speed Turn Cable
1. Remove the spring lock pin (1) and loosen the lock nuts (2)
and then remove the bi-speed turn cable (3).
(When reassembling)
CD When reassembling the bi-speed turn cable (3) make sure to
set the distance II A".
I Distance:" A" '-F-act-o-r-
y
-sp-e-c.----,-1-6~-7r-I-~-. -----
B177P323
(When reassembling)
• Apply grease to the spl ine of the propeller shaft and
coupling.
Propeller Shaft Cover and Coupling
1. Loosen the clamp and slide the propeller shaft cover (1) to
the rear.
2. Tap out the spring pin (2) and then slide the coupling (3) to
the rear.
(1) Propeller Shaft Cover
(2) Spring Pin
(3) Coupling
D2-S1