Installation Instructions

6 FRONT AXLE
[EI FRONT AXLE
MECHANISM
[1] STRUCTURE
(1) Two Wheel Drive Type
2
0319F135
4'f----------llt-\\
5)...------~~
6\-----------r1
B1700·B2100·B2400 WSM,11771
(1) Front Axle
(2) Center Pin
(3) Knuckle Arm
(4) Bushing
(5) Thrust Ball Bearing
(6) Knuckle Shaft
(7) Front Wheel Hub
(8) Slotted Nut
(9) Ball Bearing
The front axle of the 2WD type is constructed as
shown above.
The knuckle shaft (6) is attached to the front axle
(1) by the "RUMOAN" method.
With this method, the shape of the front axle is
relatively simple, and the front axle is supported at
its center with center pin (2), so that steering
operation is stable even on an uneven ground
encountered in a farm fields.
D6-M1