Installation Instructions

G GENERAL
[!1 GENERAL
[1] MAINTENANCE CHECK LIST
B1700·B21 00·B2400 WSM, 11772
Indication on hour meter After
Check point
(Change or check every interval shown below) purchase
Reference
No.
page
1 2
50
100 150 200 250 300 350 400 450 500 550 600 650 700 750 800
year years
1
HST pedal return spring
0 0 0 0 0 0
0
0
EG-1
[2] CHECK AND MAINTENANCE
A CAUTION
.. Be sure to check and service the tractor on a flat place with engine shut off, the parking brake on and
chock
the wheels.
(1) Check Points of Every 100 Hours
(1) Return Spring (for Forward Adjustment)
(2) Return Spring (for Reverse Adjustment)
(3) Adjustment Nut
(4) Lock Nut
4
Checking HST Pedal Performance
A WARNING
To avoid personal injury:
.. Do not operate if tractor moves on level ground with foot
off HST pedal.
1. Set the engine speed to 1500 rpm.
2. Shift the range gear shift lever to the high position.
3. Move the HST pedal from the forward to the neutral position
to make sure that the tractor comes to a complete stop, and
check the
same for the movement from the rearward to the
neutral position.
4. If HST pedal is too slow in returning to neutral position,
adjust the
HST pedal spring compression.
-----
Length (A)
Length
(B)
Normal compression 50 mm (2.0 in.)
50
mm (2.0 in.)
Max. com pression
42 mm (1.7 in.)
42 mm (1.7 in.)
II IMPORTANT
.. Do not compress the return spring shorter than Max.
compression length 42 mm (1.7 in.).
EG-1