Installation Instructions

B1700·B2100·B2400 WSM, 11770
7 STEERING
[1] SEPARATING POWER STEERING BODY
(1) Battery Cord
(2) Battery
Hood and Side Cover
1. Open the hood (1) from the front and remove the spring lock
pin and remove hood
with hood rod for keeping it open.
2. Remove the front grille (4).
3.
Remove the right and left side cover (2), (3).
Battery
1. Disconnect the battery cords (1) and dismount the battery
(2).
III NOTE
• When disconnecting the battery cords, disconnect the
grounding cord first. When connecting, connect the positive
cord first.
(3) Side Cover LH
(4) Front Grille
(1) Hood
(2)
Side Cover RH
Steering wheel
29.4
to 49.0 N'm
Tightening torque
3.0 to 5.0 kgf'm
mounting
nut
21.7 to 36.2 ft-Ibs
Steering Wheel
1. Remove the steering wheel cap.
2. Remove the steering wheel mounting nut and remove the
steering wheel with a steering wheel puller. (Code No :
07916-51090)
(When reassembling)
Meter
Panel and Panel Under Cover
1. Remove the meter panel (2) and disconnect the meter panel
connector (3) and
hour-meter cable (7) from the meter
panel. Then remove the meter panel.
2. Tap out the spring pin and remove the hand accelerator lever
(1 ).
3. Disconnect the combination switch connector (4) and main
switch connector
(5).
4. Remove the panel under cover (6).
(5) Main Swithch Connector
(6) Panel Under Cover
(7) Hour-meter Cable
(1) Hand Accelerator Lever
(2) Meter Panel
(3) Meter Panal Connector
(4) Combination Switch Connector
7-S5