Installation Instructions

8 HYDRAULIC SYSTEM
[8] HYDRAULIC BLOCK TYPE OUTLET
B1700·B2100·B2400 WSM,11770
The hydraulic block type outlet is located at the
right hand side ofthe engine.
This hydraulic block type outlet is provided to take
power
out from the tractor to operate the hydraulic
cylinders on the implement,
such as front end loader,
front blade and so on.
The rear hydraulic outlet is located at the right
hand side ofthe hydraulic cylinder body.
This rear hydraulic
outlet is provided to take
power out from the tractor to operate the hydraulic
cylinders on
the implement.
When
implement is not attached
From Hydraulic
1\ - -Pump
To Position ;J
Control Valve
3
When implement is attached
2
From Hydraulic
-
1\_- Pump
B177F813
[9] REAR HYDRAULIC OUTLET
When implement is not attached
From Hydraulic Pump
+
-~
'11
•
To Position Control Valve
When implement is attached
(1) Block Cover
(2) Block Outlet Cover
(Option)
(A)
To Implement (Inlet)
Max.
flow
17 i/min.
(4.5 U.S. GPM, 3.7 Imp.
GPM)
No relief valve in the
hydraulic block.
(1) Block Cover
(A) To Implement (Inlet)
Max.
flow
17 i/min.
(4.5 U.S. GPM, 3.7 Imp.
GPM)
Max. pressure
13.2 to 13.7 MPa
(135 to 140 kgf/cm
2
,
1920 to 1992 psi)
(3) Hydraulic Block
(B) From Implement (Outlet)
(2) Block Outlet Cover
(Option)
(B) From Implement (Outlet)
/'
B177F814
2
From Hydraulic Pump
® +
1_~
(9)
'll
+
To Position Control Valve
8-M8