Installation Instructions

B1700·B2100·B2400 WSM,11770
8 HYDRAULIC SYSTEM
Hook and connecting
39.2 to 44.1 N·m
plate mounting screws
4.0 to 4.5 kgf·m
and nuts
28.9 to 32.5 ft-Ibs
Top link bracket
77.5to90.1 N·m
Tightening torque
7.9to9.2 kgf·m
mounting screws
57.2 to 66.5 ft-Ibs
Hydraulic cylinder
39.2 to 44.1N·m
assembly mounting
4.0 to 4.5 kgf·m
screws and nuts
28.9 to 32.5 ft-Ibs
Hydraulic Cylinder Assembly
1. Remove the top link and disconnect the I ift rods.
2. Disconnect the wiring harness (2) and delivery pipe (1).
3. Remove the external snap ring (10).
4. Move the levers (4), (5), (11) to outside and disconnect the
rods (8), (9).
5. Remove the hook (7), connecting plate (6) and top link
bracket (3).
6. Remove the hydraulic cylinder assembly mounting screws
and nuts, and separate
the hydraulic cylinder assembly (12).
(When reassembling)
(4) Seat Rail
(5) Tool Box
(6) Seat Stay
(7) Hook
(8) Rod
(9) Rod
(10) External Snap Ring
(11) Hi-Lo Gear Shift Lever
(12) Hydraulic Cylinder Assembly
(1) Seat
(2) Lowering Speed Adjusting Knob
(3) Seat Under Cover
(1) Delivery Pipe
(2) Wiring Harness
(3) Top Link Bracket
(4) Mid PTO Gear Shift Lever
(5) Rear PTO Gear Shift Lever
(6) Connecting Plate
DISASSEMBLING AND ASSEMBLING
(1) Separating Hydraulic Cylinder Assembly
Seat, Seat Rail, Seat Stay and Seat Under Cover
1. Remove the seat (1) and lowering speed adjusting knob (2).
2. Remove the tool box (5) and seat under cover (3).
3. Remove the seat stay (6) and seat rail (4) as a unit.
8-59