Installation Instructions

B1700·B2100'B2400 WSM, 11770
[1] STRUCTURE
6 FRONT AXLE
B177F601
(1)
Bevel Gear
Case
(7)
Spiral Bevel Gear
(13)
Bevel Gear (19)
Pinion Shaft
(2)
Bevel Gear
(8)
Collar
(14)
Bevel Gear (20)
Differential Assembly
(3)
Differential Yoke Shaft
(9)
Front Axle Bracket, Front
(15)
Bevel Gear Shaft
(21)
Front Axle Bracket, Rear
(4)
Front Axle
Case
(10)
Axle Flange
(16)
Bevel Gear
(22)
Spiral Bevel Pinion Shaft
(5)
Differential Case
(11 )
Axle
(17)
Front Gear
Case
(23)
Coupling
(6)
Differential Pinion
(12)
Collar
(18)
Differential Side Gear
(24)
Propeller Shaft
The front axle of the 4WD is constructed as shown
above. Power
is transmitted from the transmission
through
the propeller shaft (24) to the spiral bevel
pinion shaft
(22), then to the spiral bevel gear (7) and
to the differential gear (18).
The power through the differential side gear is
transmitted to the differential yoke shaft (3), and to
the bevel gear shaft (15) through the bevel gears (2),
(4) in the bevel gear case (1).
The revolution is greatly reduced by the bevel
gears
(16), (13), then the power is transmitted to the
axle(11).
The
differential system allows each wheel to
rotate at a different speed to make turning easier.
6-M1