Operation Manual
BX25,
RCK54(P)-23BX,
RCK60B-23BX,
LA240,
BT601,
WSM
ENGINE
(4)
Gear Case and Timing Gears
(1
)
~
3EEADAA 1 P014A
Injection Pump, Fuel Feed Pump and Speed Control Plate
(for
Energize
to
Run Type Engine Stop Solenoid)
• NOTE
• Specific
tool
(1) :
1.2 mm diameter hard wire with
its
end hooked, overall
length 200 mm (7.87 in.).
The
tip
of
wire is bent like the hook
to
hang
governor
springs.
1.
Remove the socket head screws (2). and remove the engine stop
solenoid (4).
2.
Remove the screws and separate the speed control plate (5),
taking care not to damage the governor spring (6).
3.
Disconnect the governor spring (6) and remove the speed control
plate (5) using the specific tool (1).
4.
Remove the fuel feed pump (3).
5.
Disconnect the start spring (8) from the bracket (9) using the
specific tool (1).
6.
Remove the socket head screws and nuts, and remove the
injection pump (7).
(1) Specific
Tool
(6) Governor Spring
(2) Socket Head Screw
(7) Injection Pump
(3) Fuel Feed Pump
(8) Start Spring
(4) Engine Stop Solenoid (9) Bracket
(5) Speed Control Plate
W1148604
1-S30