Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, 8T601, WSM
ENGINE
3TMABAB1 P047A
3EEACAA 1 P089A
1101--0
/
"'----(11 )
3EEABAB1P100A
(12)
3EEABAB1P101A
Piston Ring and Connecting Rod
1. Remove the piston rings using a piston ring tool.
2. Remove the piston pin (7), and separate the connecting rod (6)
from the piston (5).
(When reassembling)
When installing the ring, assemble the rings so that the
manufacturer's mark (12) near the gap faces the top of the piston.
• When installing the oil ring onto the piston, place the expander
joint (10) on the opposite side of the oil ring gap (11).
• Apply engine oil to the piston pin.
• When installing the connecting
rod to the piston, immerse the
piston
in 80°C (176 OF) oil for 10 to 15 minutes and insert the
piston pin to the piston.
• When installing the connecting
rod to the piston, align the mark
(8)
on the connecting rod to the fan-shaped concave (9) .
• IMPORTANT
• Mark the same number on the connecting rod and the piston
so as not
to change the combination.
(1) Top Ring (7) Piston Pin
(2) Second Ring (8) Mark
(3) Oil Ring (9) Fan-Shaped Concave
(4) Piston Pin Snap Ring
(10) Expander Joint
(5) Piston (11) Oil Ring Gap
(6) Connecting Rod (12) Manufacturer's Mark
W10281670
1-837