Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
TRANSAXLE
[2] RANGE GEAR SHIFT SECTION
3TAAAAFKP007 A
(3)
l~r~~$~'i3"L
IH.!;:::=#::t:~~~H
[3] FRONT WHEEL DRIVE SECTION
(1 )
3TAAAAFKP007B
Two kinds of power flow are selected by operating the
range gear shift lever to shift the 16T-24T shiftier gear (4)
on the spiral bevel gear shaft (3).
•
Low Range
17T Gear Shaft (2)
~ Shiftier Gear (24T) (4) ~ Spiral
Bevel Pinion Shaft (3).
•
High Range
25T Gear
(1 ) ~ Shiftier Gear (16T) (4) ~ Spiral Bevel
Pinion Shaft (3).
(1) 25T Gear L: LowRange
(2) 17T Gear
H : High Range
(3) Spiral Bevel Pinion Shaft
(4) 16T-24T Shifter Gear
W1014705
2-wheel drive or 4-wheel drive is selected by
changing the position
of 19T shiftier gear (2) with the
front wheel drive lever.
•
Front Wheel Drive "Disengaged"
When the front wheel drive lever is set to
"Disengaged" position, the 19T shiftier gear (2) is
neutral and power is not transmitted to the front wheel
drive shaft (1).
•
Front Wheel Drive "Engaged"
When the front wheel drive lever is set to "Engaged"
position, the 19T shiftier gear (2) slides to the right to
engage with 13T-25T gear shaft (5). Therefore, the
power from spiral bevel pinion shaft (3) is transmitted to
the front wheel drive shaft (1) through the gears.
(1) Front Wheel Drive Shaft
(2) 19T Shifter Gear
(3)
Spiral Bevel Pinion Shaft
(4) 12T Gear
(5) 13T-25T Gear Shaft
A: Front Wheel Drive
"Engaged"
W1014843
2-M11