Operation Manual
BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
TRANSAXlE
(a)
3UBAAABNP060C
PTO
Clutch Operating Pressure
A CAUTION
• When checking, park the
tractor
on
flat ground, apply the
parking brake.
1.
Remove the under panel.
2.
Connect the adaptor
of
A between the power steering return
hose (1), then connect the adaptor B and the pressure gauge
with adaptor
A.
3.
Start the engine and set at maximum speed.
4.
Measure the pressure.
5.
If the measurement is not same as factory speCifications, check
the PTO relief valve and related hydraulic components .
• IMPORTANT
• Do
not
engage
PTO
while
measuring it.
PTO clutch operating
pressure
Factory spec.
1.0 to 1.3 MPa
10.2 to 13.3 kgf/cm
2
145.0
to
188.5 psi
PTO clutch valve plug
13 to 22
N'm
Tightening torque
1.3 to 2.2 kgf·m
(R
1/8)
9.6 to 16.2 ft-Ibs
Condition
• Engine speed : Maximum
• Oil temperature: 45 to
55°C
113t0131°F
(1) Power Steering Return Hose
A:
Adaptor
Tee,
Swivel (9/16-18)
B:
AdaptorB
(a) Connect Pressure Gauge
(b) Connect Power Steering Hose
Return
W1013552
Brake Pedal Free Travel
1.
See page G-22.
W1013715
2-S15