Operation Manual
BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
TRANSAXLE
RolI·Over Protective Structures (ROPS) and Seat
1.
Disconnect the lead wires from the hazard lights (2), (4) and turn
signal lights
(3), (5).
2. Remove the ROPS mounting nuts, and remove the ROPS (1).
3.
Disconnect the seat switch connectors.
4.
Remove the snap pin (7) and remove the seat (6).
(When reassembling)
124 to 147 N'm
Tightening torque
ROPS mounting nut 12.6 to 15.0 kgf·m
91.2 to 108 ft-Ibs
(1) ROPS
(5) Turn Signal Light
RH
(2) Hazard Light
LH
(6) Seat
(3) Turn Signal Light
LH
(7) Snap Pin
(4) Hazard Light
RH
Wi
027220
Speed Control Pedal and Step
1.
Remove the valve covers (3).
2.
Remove the speed control pedals (1) and step (2).
(1) Speed Control Pedal (3) Valve Cover
(2) Step
W1025389
Lever Grips and Fender
1.
Disconnect the electric outlet connector (6).
2. Remove the lowering speed adjusting knob (5) and cutting height
adjusting dial knob
(4).
3. Remove the lever grips (2).
4.
Remove the fender (1) with lever guide (3).
(1) Fender
(4) Cutting Height Adjusting Dial Knob
(2) Lever Grip
(5) Lowering Speed Adjusting Knob
(3) Lever Guide
(6) Electric Outlet
W1014865
Fuel
Tank
1.
Drain the fuel.
2. Disconnect the lead wire from fuel level sensor and fuel hoses
from the fuel tank (1).
3.
Remove the fuel tank stays (2), (3) and cushions, then remove
the fuel tank (1).
4. Remove the PTO cover (4).
(When reassembling)
Tightening torque
Fuel tank stay mounting
bolt and nut
48.1
to 55.9 N'm
4.9 to 5.7
kgf·m
35.4 to 41.2 ft-Ibs
(1) Fuel
Tank
(3) Fuel
Tank
Stay
RH
(2) Fuel
Tank
Stay
LH
(4) PTO Cover
Wi
027629
2-517