Operation Manual

BX25. RCK54(P)-23BX. RCK60B-23BX. LA240, BT601, WSM
TRANSAXLE
Transaxle Assembly
1. Remove the differential lock rod (1).
2. Remove the brake rod (3).
3. Disconnect the pipes (2).
4. Disconnect the connector (4).
5. Remove the rear coupling mounting bolt (7).
6. Disconnect the power steering pipes (8).
7. Remove the speed control rod (6).
8. Remove the wire harness clamps
9. Remove the frame brackets (10).
(When reassembling)
• Tighten the smaller bolt (M12) first.
• Before mounting the transaxle assembly
on the tractor main
frame, check the flatness
of the frame brackets with a straight
edge securely.
Tightening torque
Transaxle assembly
mounting bolt (M12)
62.8 to 72.6
N'm
6.4 to 7.4 kgf·m
46.3 to 53.5 ft-Ibs
Transaxle assembly
mounting bolt (M14)
124 to 147 N·m
12.6 to 15.0 kgf'm
91.2
to 108 ft-Ibs
Rear coupling mounting
bolt (M8)
23.6
to 27.4 N'm
2.4 to 2.8 kgf·m
17.4
to 20.2 ft-Ibs
(Reference)
• Speed control rod length (7) : 371 mm (14.6 in.)
(1) Differential Lock Rod
(6) Speed Control Rod
(2) Pipe
(7) Rear Coupling Mounting Bolt
(3) Brake Rod
(8) Power Steering Pipe
(4) Connector
(9) Frame Bracket
(5) Front Wheel Drive Shaft
(10) Frame Bracket
W1016000