Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
TRANSAXLE
[3] DISASSEMBLING AND ASSEMBLING
(1) Hydrostatic Transmission
3TAAAAFKP027B
(4) (4) (4)
3TAAAAFKP053A
Levers and Mower Lift Arm
1. Tap out the spring pin from the range gear shift lever (1) and front
wheel drive lever (3), then remove the both levers.
2. Remove the hydraulic control lever (2).
3. Remove the PTO select lever (4) and PTO clutch control lever
(5).
(When reassembling)
• Apply grease to inside of the front coupling and rear mounting.
Hydraulic control lever
17.7 to 20.6 N'm
nghtening torque 1.8 to
2.1 kgf·m
mounting bolt and nut
13.0 to 15.2 ft-Ibs
(1) Range Gear Shift Lever (4) PTO Select Lever
(2) Hydraulic Control Lever
(5) PTO Clutch Control Lever
(3) Front Wheel Drive Lever
W1017118
PTO Clutch Valve
1. Remove the stopper (1).
2. Draw out the PTO clutch valve (2) from the transaxle assembly.
(When reassembling)
1. Clean the oil passages (4).
2. Apply the transmission fluid to the O-rings (3).
(1) Stopper (3) O-ring
(2) PTO Clutch Valve
(4) Oil Passage
W1086372
2-523