Operation Manual
BX25, RCK54(P)-23BX. RCK60B-23BX.
lA240,
6T601, WSM
TRANSAXLE
HST Front Cover
1.
Remove the internal cir-clip (4).
2.
Remove the HST front cover.
3.
Remove the HST front cover (1) not to damage the oil seal (5).
4.
Remove the center section (6).
(When reassembling)
1.
Do not damage the oil seal (5).
2.
Tighten the HST mounting bolts and the nut
to
the factory
specifications.
Tightening torque
HST front cover mounting
bolt (MS)
18.0 to 21.0 N'm
1.8 to
2.1
kgf·m
13.3 to 15.5 ft-Ibs
nghtening torque
HST front cover mounting
nut (MS)
1S.0
to 21.0 N'm
1.S
to
2.1
kgf·m
13.3 to 15.5 ft-Ibs
(1) HST Front Cover
(4) Internal Cir-clip
(2) Transaxle Assembly
(5) Oil Seal
(3) Bolt
(6) Center Section
W10S6612
Center Section and Valve Plates
1.
Remove the valve plates (2).
(When reassembling)
1.
Check the direction
of
the groove (3).
2.
Install the valve plates (2) to the anchor pins (4) securely.
3.
Install the groove
of
the valve plate (pump plate) to the engine
side.
(1) Center Section (3) Groove
(2) Valve Plate
(4) Anchor Pin
W10S6956
2-S24