Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
TRANSAXLE
Cylinder Block
1. Remove the gasket (1).
2. Remove the O-ring (2).
3. Remove the cylinder block assembly (4) (5) from the transaxle.
(When reassembling)
• Turn the disassembling and the assembling stand vertically.
• Install the cylinder block assembly (4) (5) to the shafts not to drop
the pistons from the cylinder block assembly (4) (5) carefully.
(1) Gasket (5) Cylinder Block Assembly (Pump
(2) O-ring Side)
(3) Pump Shaft (6) Cylinder Block Assembly (Motor
(4) Cylinder Block Assembly (Pump Side)
Side)
W1087850
Cylinder Block and Piston
1. Remove the piston (3) and the spring (2) from the cylinder block
(1 ).
(When reassembling)
• Apply clean transmission oil to the cylinder block and the piston.
(3)
• NOTE
• Take care not to damage the surface of the cylinder block
and the piston.
(1) Cylinder Block
(3) Piston
(2) Spring
(1)
3TAAAAFKP066A
W1088078
2-S26