Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
TRANSAXLE
4WD Detent Ball
1. Remove the 4WD detent bolt (1), the detent spring (2) and the
detent ball (3) before removing the transaxle front case, not to
drop the detent ball
(3) into the trans axle case.
(1) 4WD Detent Bolt
(3) Detent Ball
(2) Detent Spring
(4) Transaxle Front Case
W1102203
Neutral Arm and Trunnion Arm
1. Disconnect the neutral spring(2) from the H5T front cover.
2. Loosen the neutral adjuster
(5).
3. Remove the external cir-clip (7).
4. Remove
the bolts (1).
5. Remove the neutral adjuster (5) and the neutral arm (3).
6. Remove the trunnion arm (6).
(When reassembling)
• Adjust the H5T neutral position. Refer to "Checking and
Adjusting"
section.
(1) Bolt (5) Neutral Adjuster
(2) Neutral Spring
(6) Trunnion Arm
(3) Neutral Arm
(7) External Cir-clip
(4) Lock Screw
W1088807
2-528