Operation Manual

BX25. RCK54(P)-23BX, RCK60B-23BX. LA240, BT601. WSM
TRANSAXLE
3TAAAAFKP086A
Rear PTa Cover Assembly
1. Remove the rear PTO cover mounting bolts (1).
2. Remove the rear PTO cover (2).
3. Remove the rear PTO shaft (5) from the rear PTO cover (2).
(When reassembling)
• Pull the 11T PTO select shaft with the bearing approximately the
bearing thickness.
• Apply liquid gasket (Three Bond 1208D
or equivalent) to the joint
surface
of transaxle case to the rear PTO cover.
• Bind the vinyl tape to the rear PTO shaft not to damage the oil
seal.
lightening torque
Rear PTO cover mounting
bolt (Ma)
18.0 to 21.0 N'm
1.8 to 2.1 kgf·m
13.3 to 15.5 ft-Ibs
(1) Bolt (5) Rear PTO Shaft
(2) Rear PTO Cover (6) Oil Seal
(3) Bearing
(7) Vinyl Tape
(4)
11T PTO Select Shaft
W1090219
2-832