Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
TRANSAXLE
Rear Axle Case (RH)
1. Remove the rear axle case (RH) mounting bolts.
2. Remove the rear axle case (RH) (1) as an assembly from the
transaxle case .
• NOTE
• Since the adjusting shims are installed behind the 37T spiral
bevel gear, check the shims.
3. Remove the 37T spiral bevel gear (2).
4. Remove the 10T final gear shaft (3).
5. Remove the 66T final gear with the differential lock shift fork.
(When reassembling)
• Apply liquid gasket (Three Bond 12080 or equivalent) to the joint
surface
of transaxle case to the rear axle (RH) case.
Tightening torque
Rear axle case (RH)
mounting bolt (MS)
1S.0 to 21.0 N·m
1.S to 2.1 kgf·m
13.3 to 15.5 ft-Ibs
(1) Rear Axle Case (RH)
(3) 10T Final Gear Shaft (Brake Shaft)
(2) 37T Spiral Bevel Gear
(4) 66T Final Gear
W1091120
2-S34