Operation Manual

BX25. RCK54(P)-23BX. RCK60B-23BX. LA240. BT601, WSM
FRONT AXLE
Disconnecting Propeller Shaft
1. Tap out the spring pins (2) and disconnect the universal joint (1)
and spiral bevel pinion shaft.
(When reassembling)
• Apply grease to the splines
of the propeller shaft and universal
joint.
(1) Universal Joint
(2) Spring Pin
W1013075
Front Axle Assembly
1. Remove the power steering hose cramp (1).
2. Place the garage jack under the front axle.
3. Remove the cotter pin (1).
4. Remove the slotted nut (2)
of center pin and separate the front
axle from the frame.
5. Disconnect the power steering cylinder hoses (4).
(When reassembling)
• After mounting the front axle assembly to the frame. be sure to
adjust the front axle rocking force. (See page 3-S4.)
• Installing the cotter pin. be sure
to split the cotter pin like an
anchor
Tightening torque
Power steering cylinder
hose
23.6 to 27.4 N'm
2.4 to 2.8 kgf'm
17.4 to
20.2 ft-Ibs
(1) Hose Cramp (3) Slotted Nut (Adjusting Nut for Front
(2) Cotter Pin
Axle Rocking Force)
(4) Power Steering Hose
W1023380
3-S7