Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
FRONT AXLE
[3] DISASSEMBLING AND ASSEMBLING
(1) Front Axle Assembly
Power Steering Cylinder
1. Remove the cotter pin and remove the slotted nut for tie-rod (1).
2. Remove the power steering cylinder mounting screws and
remove the power steering cylinder (2) with tie-rod.
(When reassembling)
• NOTE
• Tighten the slotted
nut to 17.7 N'm (1.8 kgf·m, 13 ft-Ibs). If
the slot and pin hole do not meet, tighten the nut until they
do meet, and install the cotter pin.
• Be sure
to split the cotter pin like an anchor.
3TAAAAF6P011A
17.7 to 34.3 N'm
Tie-rod slotted nut
1.8 to 3.5 kgf-m
lightening torque
13.0 to 25.3 ft-Ibs
Power steering cylinder
mounting screw
48.1 to 55.8 N'm
4.9 to 5.7 kgf·m
35.5 to 41.2 ft-Ibs
3TAAAAF6P012A
3TAAAAF6P013A
(1)
lie-rod (2) Power Steering Cylinder
W1013368
Bevel Gear Case and Front Gear Case
1. Remove the bevel gear case mounting screws.
2. Remove the bevel gear case (2) and front gear case (1) as a unit
from the front axle case (3).
(When reassembling)
• Apply grease to the O-ring and take care not to damage it.
• Do not interchange right and left bevel gear case assemblies and
right and left gear case assemblies.
Bevel gear case mounting
77.51090.1 N'm
Tightening torque 7.9 to 9.2 kgf·m
screw (M12)
57.1 to 66.5 ft-Ibs
(1) Front Gear Case (3) Front Axle Case
(2) Bevel Gear Case
W1013787
Front Gear Case Cover
1. Remove the front gear case mounting screws and remove the
front gear case cover (1) with bevel gear (2).
(When reassembling)
• Apply grease to the O-ring and take care not to damage it.
Tightening torque
Front gear case cover
mounting screw
48.1 to 55.8 N'm
4.9 to 5.7 kgf-m
35.5 to 41.2 ft-Ibs
(1) Front Gear Case Cover
(3) Front Gear Case
(2) Bevel Gear
W1013952
3TAAAAF6P014A
3-58