Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
FRONT AXLE
(4)-----' ._ -(3)
.. -(2)
0-(1)
3TAAAAF6P016A
3TAAAAF6P017 A
1\ ;(8) (9) (10)
(6)~ ~ il /(11)
~ Oil
1121 (13)
'v,
I
3TAAAAF6P018A
(12)
Front Gear Case and Bevel Gear Case
1. Remove the internal snap ring (1).
2. Remove the bevel gear with ball bearing (3) and shim (2).
3. Remove the bevel gear (4).
4. Remove the external snap ring (7).
5. Remove the bevel gear case (5) from front gear case (6).
6. Remove the oil seal (12) and the ball bearing (11).
7. Remove the internal snap ring (10) and remove the ball bearing
(9).
8. Remove the bevel gear shaft (8) with ball bearing.
(When reassembling)
• Install the oil seal (12) of bevel gear case, noting its direction as
shown in the figure.
• Install the adjusting shims (2) to their original position.
(1) Internal Snap Ring
(8) Bevel
Gear Shaft
(2) Shim
(9) Ball Bearing
(3) Ball Bearing
(10) Internal Snap Ring
(4) Bevel
Gear
(11) Ball Bearing
(5) Bevel
Gear Case
(12) Oil Seal
(6) Front
Gear Case
(13) Ball Bearing
(7) External Snap Ring
Wl014354
3-S10