Operation Manual
BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM STEERING
Steering Wheel
1.
Remove the steering wheel cap (1).
2.
Remove the steering wheel mounting nut and remove the
steering wheel.
(When reassembling)
3TAAAAB7P012A
TIghtening torque
Steering wheel mounting
nut
20 to 25 N'm
2.0 to 2.6 kgf·m
14.8 to 18.4 ft-Ibs
(1) Steering Wheel Cap
W1011793
Meter Panel
1.
Disconnect the main switch connector and combination switch
connector (7).
2.
Remove the hand accelerator lever grip and cruise control lever
knob.
3.
Disconnect the hand accelerator wire (3) and then turn the hand
accelerator lever (2) to the operator seat side.
4. Open the bonnet, remove the panel mounting screws and
dismount the meter panel.
(1) Meter panel
(5) Main Switch
(2) Hand Accelerator Lever (6) Combination Switch
(3) hand Accelerator Wire
(7) Connector for Combination Switch
(4) Cruise Control Lever
W1011901
Steering
Controller
1.
Disconnect the power steering hoses (1). (2). (3), (4).
2.
Remove the steering controller mounting screws and remove the
steering controller (5).
(When reassembling)
• Be sure to connect the power steering hoses to their original
position, and tighten them to the specified torque.
TIghtening torque
Power steering hose
mounting nut
28.4 to 30.0
N'm
2.9 to
3.1
kgf·m
20.9 to 22.1 ft-Ibs
(1) Cylinder Hose
RH
(2) Cylinder Hose
LH
(3) Delivery Hose
(4) Retum Hose
(5) Steering
Controller
A:
Bottom
View
P:
Pump Port
(Connect
to
Delivery Hose)
T:
Tank Port
(Connect
to
Return Hose)
L:
L Port
(Connect
to
Cylinder LH Hose)
R:
R Port
(Connect
to
Cylinder
RH
Hose)
a:
Right
b:
Front
W1012133
4-S5