Operation Manual

BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
HYDRAULIC SYSTEM
• Lift
(1 )
3TAAAAF8P028A
T1
(3)
3TAAAAF8P035A
When the control lever is set to the "Lift" position, the
spool (4) moves to the right.
The oil forced into the control valve flows through P
port to C port and the hydraulic cylinder.
The oil pushes the hydraulic piston
in the hydraulic
cylinder
to lift the implement.
Since the spool shape is step down structure, oil
passes slowly through the gap between the control valve
body (3) and the spool (4) to C port.
In this tractor, when setting the control lever to the
"Slow up", implement lifts up with ease
in increments of
approximately
1/4 inches at lower link end.
(1) Lift Arm
(2) Hydraulic Cylinder
(3) Control Valve
(4) Spool
(5)
lowering Adjusting Shaft
P: Pump Port
C : Cylinder Port
T1 :Tank Port
T2 :Tank Port
W1016112
5-M4